Liitu SMART NET lojaalsusprogrammiga ja säästa! Liitu

Eriotstarbeline värv, radiaatoritele Dekoral Radiator, valge, 0.75 l


Vabandame, antud toode pole hetkel saadaval. Kuvame teisi selle tootegrupi tooteid - loodame, et leiad sarnase toote.

Võid jätkata ostlemist, naastes avalehele või kasutades otsingut.
Tooteinfo

Toote omadused

Üldnäitajad

Toote tüüp Eriotstarbeline värv
Kaubamärk Dekoral
Kollektsioon Radiator
Kogus pakendis, l 0.75
Värvi tüüp Eriotstarbeline värv
Värvi nimi Valge
Värv Valge
Läige Läikiv
Vedeldi Vesi
On mõeldud viimistlustöödele Sise-
Värvi otstarve Radiaatoritele
Sobib pinna katteks Lehtterast
Kulu 12 m²/l
Tööriistad Pihusti, Pintsel, Rull
Kuivamisaeg (puutekuiv) 2 - 3 h
Kuivamisaeg (enne ülevärvimist) 4 h
Kuivanud täielikult pärast 72 h
Sobib kuumadele pindadele Jah
Täiendav info Radiaatorite ja muude metallpindade värvimiseks, kus kollaseks muutumise vältimiseks on vajalik kuumakindlus.
Toote kirjeldus inglise keeles: The most important features:
  • It is suitable for copper elemanns
  • It does not turn yellow
  • Resistance to temperature of 100ºC
  • waterborne
  • Fast drying

Short description:

Water-borne acrylic enamel is intended for protective and decorative painting of metal, copper and cast iron elements, in particular heating devices protected against corrosion or for renovation painting. Resistant to temperatures up to 100ºC.

Application method:
Preparation of the substrate
  • The surface to be painted must be cleaned of dirt, ground, degreased and dried.
  • In the case of renovation painting, before painting, the surface should be sanded with fine-grained abrasive paper. To degrease the painted surface, use water with the addition of detergent.
  • Old loosely adhering paints must be removed.
  • The surfaces and copper tubes should be thoroughly sanded with fine grit sandpaper to reveal the proper surface, welds and burrs smoothed with steel brushes.
  • All elements must be degreased.

Painting
  • Before use, the product should be mixed thoroughly.
  • If necessary, dilute the drinking water in the max. 2% vol.
  • Apply directly to cleaned surfaces.
  • Paint with a brush or roller.
  • Recommended number of layers: 2-3.
  • Apply the second coat after a minimum of 4 hours.

Additional information
  • The coating obtains full operational properties after 72 hours.
  • Always paint cold radiators at an ambient temperature of + 10ºC to + 30ºC.
  • After finishing the painting, the tools should be washed thoroughly under running water.

Safety instructions and PPO
  • Keep away from children.
  • If swallowed, seek medical advice immediately - show the packaging or label.
  • During painting works and after their completion, ventilate a specific odor before use.
  • Follow the instructions on the packaging.
Toote tegelik värvus võib erineda piltidel kujutatavast ning pilt on illustratiivne. Toote kirjeldus on üldise iseloomuga ning seal ei pruugi olla välja toodud kõik omadused. E-poe hinnad võivad erineda kauplustes ja teeninduspunktides kehtivatest hindadest. Kampaaniad e-poes võivad erineda jaekaubanduse kampaaniatest. Kampaaniatoodete kogused on piiratud ning jaekaubanduse laojäägid ja e-poe olevad kaubad ei pruugi kokku langeda, seetõttu võib eeldatav tarneaeg tellimuse vormistamisel näidatust erineda. Kui mõnda toodet tellimuse täitmise hetkel laos ei ole, teavitatakse Ostjat sellest eraldi esimesel võimalusel.

Kas nägid vigu tootekirjelduses või piltide galeriis? Teavita meid