Информация о товаре
Описание товара на английском языке:
Increase your safety and comfort when maneuvering your car and choose a universal rear-view camera set with display – Tracer RVIEW. You will easily install it in your car, without any serious changes to the roofing, dashboard, or the electrical system of your vehicle. If you connect the set to the reversing lamp, the set will be able to activate automatically when you engage the reverse gear.
The folding dashboard monitor with 4.3-inch screen diameter is dedicated for rear-view cameras and other devices with RCA Cinch connectors. An adjustable mount with a robust tape allows to install the device both on the dashboard and the window or the car roofing. The screen has two video inputs and allows for image parameter configuration. It activates automatically upon reception of a signal.
A camera with IR diodes built into the registration plate frame is a convenient solution allowing you to install the set in the place of the traditional, plastic rear registration plate frame. Thanks to that, you do not have to drill in the bumper or the tailgate. All you need to do to make your camera operational is route the cable through the trunk. 4 infra-red diodes allow for a clear preview in poor lighting conditions, e.g. at night or in a tunnel.
The set enables both the reverse gear mode and the ongoing preview mode. In the first case, both elements need to be connected to the reversing lamps, which will activate it automatically whenever the reverse gear is engaged. You may, however, connect both elements to the cigarette outlet using a special plug (not included in the set); that way the set will send the image from the camera all the time, i.e. from the moment the cigarette lighter outlets (cockpit, trunk) power up.
Increase your safety and comfort when maneuvering your car and choose a universal rear-view camera set with display – Tracer RVIEW. You will easily install it in your car, without any serious changes to the roofing, dashboard, or the electrical system of your vehicle. If you connect the set to the reversing lamp, the set will be able to activate automatically when you engage the reverse gear.
The folding dashboard monitor with 4.3-inch screen diameter is dedicated for rear-view cameras and other devices with RCA Cinch connectors. An adjustable mount with a robust tape allows to install the device both on the dashboard and the window or the car roofing. The screen has two video inputs and allows for image parameter configuration. It activates automatically upon reception of a signal.
A camera with IR diodes built into the registration plate frame is a convenient solution allowing you to install the set in the place of the traditional, plastic rear registration plate frame. Thanks to that, you do not have to drill in the bumper or the tailgate. All you need to do to make your camera operational is route the cable through the trunk. 4 infra-red diodes allow for a clear preview in poor lighting conditions, e.g. at night or in a tunnel.
The set enables both the reverse gear mode and the ongoing preview mode. In the first case, both elements need to be connected to the reversing lamps, which will activate it automatically whenever the reverse gear is engaged. You may, however, connect both elements to the cigarette outlet using a special plug (not included in the set); that way the set will send the image from the camera all the time, i.e. from the moment the cigarette lighter outlets (cockpit, trunk) power up.
Часто покупают вместе
