Name: Корпус компьютера AeroCool Falcon V1, черный цв.
Brand: AeroCool
Price: 46.8 EUR
Availability: OutOfStock

Информация о товаре

Общие характеристики

Тип продукта

Корпуса компьютеров

Бренд

AeroCool

Модель

Falcon V1

Размер корпуса

Mid tower (ATX)

Материал

Cталь

Цвет

Черный цв.

Интегрированный блок питания (PSU)

Нет

Возможности расширений

Количество 2.5-дюймовых отделений

Количество 3.5-дюймовых отделений

Количество 5.25-дюймовых отделений 5.25

Число вентиляторов

Подключения передней панели

Тип портов

2 x USB 3.0, Audio In, Audio Out, USB 2.0

Габариты и вес

Ширина

20.6 см

Глубина

35.7 см

Высота

45.7 см

Дополнительно

Право предъявления претензии для физических лиц

24 месяц

Заметил ошибку в описании товара, в таблице характеристик или в галерее фотографий? Сообщи нам об этом

Цвет товара может отличаться от того, что видно на фотографии.

The Aerocool Falcon Midi-Tower in detail
Always keep an eye on your build, the Aerocool Falcon enchants all owners with its FRGB fans. With the tempered glass on the side, it's hard not to keep an eye on its build. The Midi-Tower does very well on desks. With the mesh front, you can create a quiet, high-performance Airflow so it doesn't bother you while gaming.

The Airflow: Work on an air or water cooling system
Aerocool makes it as easy as possible for you. The Falcon already has four fans pre-installed. Three in the front and one in the back, they promote the overpressure in the PC, where a lot of excess air evades through openings from the PC. So you don't have to buy extra fans, the air cooling works perfectly.

For high-end systems that require stronger cooling, additional fans can still be used in the lid or in the bottom to relieve the heat of graphics cards. There are two 120 mm fans each, which can be placed on the power supply cover or in the lid.

However, you also have the option of dispensing with a CPU cooler and using all-in-one water cooling. Radiators can be mounted in the front or back. They must not exceed the length of 360 mm at the front and 120 mm at the rear!

Your build: the organization of hardware
The Aerocool Falcon fits all motherboards up to the ATX format. CPU coolers must not be higher than 157 mm and graphics cards can fit up to 290 mm in length. Attention! This information only applies without the use of a radiator in the front.

A total of three drives find their way into the enclosure. As long as there are two 3.5 inch HDDs in the hard drive cage with a 2.5 inch SSD behind the motherboard tray. Or you can dispense with the use of an HDD for an SSD on the drive cage. In addition to the hard disk cage, a standard ATX power supply can be installed.

The Aerocool is characterized by the power supply cover. It helps to sort cables better and thus keep the overall build of the PC clean. For cable management, 17 mm of space remains behind the motherboard tray.

All common connections can be found in the I/O panel
On the I/O panel you have easy and fast access to two USB 3.0 ports, as well as one USB 2.0. If your PC hangs up once or you want to restart it quickly for another reason, you will also find a button for it. HD audio is also provided! A microphone and headphones can be connected.

Enhance your look with RGB lighting
FrGB fans are pre-installed in the Aerocool Falcon. Their peculiarity is that they reproduce static colors instead of effects. In combination with the mesh front, this results in a stylish design, which is further enhanced by further RGB components. But the case itself is eye-catching enough and is also happy about a quiet interior.