Информация о товаре

Общие характеристики

Тип продукта

Корпуса компьютеров

Бренд

Jonsbo

Модель

D40

Размер корпуса

Mid tower (ATX)

Материал

Алюминий, Закалённое стекло, Пластик

Цвет

Черный цв.

Интегрированный блок питания (PSU)

Нет

Возможности расширений

Количество 2.5-дюймовых отделений

Количество 3.5-дюймовых отделений

Количество 5.25-дюймовых отделений 5.25

Подключения передней панели

Тип портов

1 x USB 3.2 Gen 1 Type-A, 1 x USB 3.2 Gen 2 Type-C, Audio jack

Габариты и вес

Ширина

20.4 см

Глубина

40.1 см

Высота

38.6 см

Вес

4.4 кг

Дополнительно

Фоновое освещение

Нет

Право предъявления претензии для физических лиц

24 месяц

Право предъявления претензии для юридических лиц

12 месяц

Заметил ошибку в описании товара, в таблице характеристик или в галерее фотографий? Сообщи нам об этом

Цвет товара может отличаться от того, что видно на фотографии.

Midi tower with tasteful design
The Jonsbo D40 midi tower comes with a simple yet very chic design. The exterior is understated yet striking thanks to the materials used.

On closer inspection, however, it becomes clear that the D40 is not a normal midi tower. The typical arrangement of the components has been changed. This not only creates a different design, but also unusual cooling options.

Vertical airflow for best cooling results
By moving the power supply from its traditional place at the bottom of the case to the front, you have a whole new way of cooling your components. The main supply of fresh air is no longer at the front, but at the bottom of the case. This ensures an unobstructed vertical airflow that makes use of the laws of physics and thus additionally conveys the heated exhaust air out of the case via a chimney effect.

There is space for three 120 or two 140 mm fans at the bottom to supply your system with fresh air. There is space for two 120 or 140 mm fans at the top and one 120 mm fan at the back.

If you decide to use a radiator, you can place a 240 mm radiator at the bottom and another 240 radiator in the lid. A 120 mm radiator is possible at the rear. So you have enough options to cool your components appropriately.

Plenty of room for air cooler
Graphics cards are coming with bigger and bigger coolers, so it's important that you have enough space in your case. The D40 can accommodate graphics cards up to 355 mm length. Hardware is becoming more and more power-hungry. So the power supplies that can deliver that power need a lot of space. The D40 offers space for a maximum of 280 mm long power supply units. If your power supply unit is longer than 170 mm, there is still 305 mm of space for the graphics card.

If you prefer air cooling, you don't have to worry about that either. The D40 offers enough space for CPU air coolers with a maximum height of 168 mm. This means that most coolers will find their way into your case and reliably keep the temperatures in your system in check.

Lots of mass storage
For dedicated data collectors, there are a total of three mounting places for 2.5-inch and one place for 3.5-inch data carriers or a total of four for 2.5-inch data carriers. Mounting locations are at the front of the power supply bay, at the rear of the bay, and under the power supply.

Modern I/O panel and high-quality materials
The I/O panel is located on the front. It offers a power button, a USB 3.0 Type-A port, another Type-C port, as well as a combined 3.5 mm HD audio and microphone jack.

The main feature of the D40 is definitely its unobtrusive design. The front is made entirely of matte aluminium alloy. The left side panel is made of tempered glass. It is transparent and gives you a good view of your internal components. Ventilation slots are only visible on the top. Stands made of milled aluminium complement the restrained design perfectly.