Информация о товаре
Описание товара на английском языке:
Noise is an annoying side effect that is caused not only at the airport by aircraft taking off and in traffic by passing trucks. Especially in your own home, therefore, many people strive to provide peace, to find relaxation. Unfortunately, the PC is in many cases contrary to these efforts and annoying during operation with high noise.
The sources of noise are initially all rotating components, which mainly affects fans and hard drives. These should be decoupled and, if necessary, the speed reduced. Many housings support these measures and already offer ex works equipment.
In addition, an insulation can provide even lower external noise. With this modified version of the PHANTEKS Eclipse P400 Midi-Tower, both approaches are connected and the housing is equipped with pre-installed insulation.
The special feature of this compilation is that in addition to the pre-installed insulation mats, additional insulation material included. This is also tailored to fit and allows additional sealing of other housing parts. As a result, you have the choice of how much insulation you use to achieve an individual optimum of cooling and volume reduction.
When delivered, the PHANTEKS Eclipse P400 Midi Tower has been fitted with insulating mats at all mandatory locations to reduce component noise. These include the right side panel, the front and the entire floor (2-part). Two mats in the lid have already been pre-positioned and another mat is loosely in the housing. This is also tailored to fit and can be installed as needed. It is intended for the upper back.
All additional insulation mats are labeled, which together with an enclosed installation manual ensures trouble-free installation. The manual is specially tailored to the requirements of the PHANTEKS Eclipse P400 Midi-Towers and explains in detail the installation, gives practical tips and explains the possibilities and insulation options.
Function: The insulating mats achieve a noise reduction via two effects. First, the soft material absorbs airborne vibrations. At the same time, the mats reduce self-propagating vibrations via the housing, above all by their own weight. Both together ensure that the outer sides of the case are hardly stimulated to vibrate. In addition, the built-in fans should be throttled with the built-in control.
Note: Please note that due to the insulating mats, the space inside the housing may be smaller. Under certain circumstances, the laying of cables behind the mainboard tray can only be limited in comparison to the uninsulated version.
Technical details:
Noise is an annoying side effect that is caused not only at the airport by aircraft taking off and in traffic by passing trucks. Especially in your own home, therefore, many people strive to provide peace, to find relaxation. Unfortunately, the PC is in many cases contrary to these efforts and annoying during operation with high noise.
The sources of noise are initially all rotating components, which mainly affects fans and hard drives. These should be decoupled and, if necessary, the speed reduced. Many housings support these measures and already offer ex works equipment.
In addition, an insulation can provide even lower external noise. With this modified version of the PHANTEKS Eclipse P400 Midi-Tower, both approaches are connected and the housing is equipped with pre-installed insulation.
The special feature of this compilation is that in addition to the pre-installed insulation mats, additional insulation material included. This is also tailored to fit and allows additional sealing of other housing parts. As a result, you have the choice of how much insulation you use to achieve an individual optimum of cooling and volume reduction.
When delivered, the PHANTEKS Eclipse P400 Midi Tower has been fitted with insulating mats at all mandatory locations to reduce component noise. These include the right side panel, the front and the entire floor (2-part). Two mats in the lid have already been pre-positioned and another mat is loosely in the housing. This is also tailored to fit and can be installed as needed. It is intended for the upper back.
All additional insulation mats are labeled, which together with an enclosed installation manual ensures trouble-free installation. The manual is specially tailored to the requirements of the PHANTEKS Eclipse P400 Midi-Towers and explains in detail the installation, gives practical tips and explains the possibilities and insulation options.
Function: The insulating mats achieve a noise reduction via two effects. First, the soft material absorbs airborne vibrations. At the same time, the mats reduce self-propagating vibrations via the housing, above all by their own weight. Both together ensure that the outer sides of the case are hardly stimulated to vibrate. In addition, the built-in fans should be throttled with the built-in control.
Note: Please note that due to the insulating mats, the space inside the housing may be smaller. Under certain circumstances, the laying of cables behind the mainboard tray can only be limited in comparison to the uninsulated version.
Technical details:
- PHANTEKS Eclipse P400 Midi Tower, tempered glass, black - insulated
- Dimensions: 210 x 465 x 470 mm (W x H x D)
- Weight: about 7 kg
- Material: steel, plastic, tempered glass
- Color: Black
- Form factor: E-ATX (up to 272 mm width), ATX, Micro-ATX, Mini-ITX
- Total possible fan:
2x 140 / 3x 120 mm (front)
2x 140/120 mm (cover)
1x 120 mm (back) - Pre-installed:
1x 120 mm (front)
1x 120 mm (back) - Radiator mountings (partial waiver of HDD and / or fan slots):
1x max. 280/360 mm (front)
1x max. 120 mm (back) - Filter: front, power supply, cover (removable)
- Drive bays:
2x 2.5 inches (behind mainboard tray)
2x 2.5 / 3.5 inches (internal, tool-free mounting) - Power supply: 1x standard ATX (optional)
- Expansion Slots: 7
- I / O panel:
1x power button (with RGB LED)
1x LED controller
2x USB 3.0
2x audio - Maximum graphics card length: 395 mm
- Maximum CPU cooler height: 160 mm
- Maximum power supply length: 270 mm
- Insulation (glued):
1x side panel (right)
1x front
2x floor - Insulation (clamped):
2x cover - Insulation (enclosed):
1x back
Часто покупают вместе
Воздушный охладитель для корпуса Phanteks D30 PWM Regular Airflow, 140 мм x 140 мм
87,90 €
Обычная цена
96,90 €
Воздушный охладитель для корпуса Phanteks PH-F120D30R DRGB PWM WT01, 120 мм x 120 мм
32,90 €
Обычная цена
38,90 €
Воздушный охладитель для корпуса Phanteks PH-F120D30R DRGB PWM WT01, 120 мм x 120 мм
32,90 €
Обычная цена
38,90 €
Воздушный охладитель для корпуса Phanteks PH-F120D30R DRGB PWM BK01 3P, 120 мм x 120 мм
87,90 €
Обычная цена
96,90 €
Воздушный охладитель для корпуса Phanteks PH-F120D30 DRGB PWM WT01, 120 мм x 120 мм
32,90 €
Обычная цена
38,90 €
