Информация о товаре
Описание товара на английском языке:
LevelOne RJ45 To SC BIDI Fast Ethernet Media Converter Set FVT-2202
FVT-2202 Fast Ethernet Media Converter Set is ideally designed for connecting two copper wire networks over long distances via fiber optical communication. Featuring Bi-directional (BIDI) fiber optic interface with SC connector allows data transfer in either direction through a single optical fiber by employing separate wavelengths travelling in either direction. Used in single-mode with fibre-optic cabling, this can extend a network range up to 20km.
General:
DIP Switch 1: LFP function
DIP Switch 2: Transmission Mode
DIP Switch 3: Auto/Force the UTP port work mode
DIP Switch 4: 10/100M for UTP port
DIP Switch 5: Full/Half Duplex mode for UTP port
DIP Switch 6: Normally close
Standards & Protocols:
IEEE 802.3 10-BASE-T, Ethernet
IEEE 802.3u 100-BASE-TX, Fast Ethernet
IEEE 802.3x Flow Control (full-duplex flow control)
Port:
1 x 100Base-FX Single-mode Single-core(WDM) SC
Fiber cable: 8.3/125um, 9/125um, 10/125um
1 x 10/100Base-TX RJ-45 Port, auto MDI/MDI-X and Auto-Negotiation
CAT-5 Twisted Pair cable
Indicator: PWR, TX (FDX, 100, Link/Act), FX (100, Link/Act)
Wavelength (nm): TX1310/RX1550nm / TX1550/RX1310nm
Transmission Method: Store and forward (Default)
Power Input: DC 5V/1A
Operating Temperature (°C):
Storage: -40 ~75 °C
Operating: -10 ~ 55 °C
Operating Humidity (Non-condensing): 5 ~ 90 %
Mount: Desk, chassis mounted
LevelOne RJ45 To SC BIDI Fast Ethernet Media Converter Set FVT-2202
FVT-2202 Fast Ethernet Media Converter Set is ideally designed for connecting two copper wire networks over long distances via fiber optical communication. Featuring Bi-directional (BIDI) fiber optic interface with SC connector allows data transfer in either direction through a single optical fiber by employing separate wavelengths travelling in either direction. Used in single-mode with fibre-optic cabling, this can extend a network range up to 20km.
General:
DIP Switch 1: LFP function
DIP Switch 2: Transmission Mode
DIP Switch 3: Auto/Force the UTP port work mode
DIP Switch 4: 10/100M for UTP port
DIP Switch 5: Full/Half Duplex mode for UTP port
DIP Switch 6: Normally close
Standards & Protocols:
IEEE 802.3 10-BASE-T, Ethernet
IEEE 802.3u 100-BASE-TX, Fast Ethernet
IEEE 802.3x Flow Control (full-duplex flow control)
Port:
1 x 100Base-FX Single-mode Single-core(WDM) SC
Fiber cable: 8.3/125um, 9/125um, 10/125um
1 x 10/100Base-TX RJ-45 Port, auto MDI/MDI-X and Auto-Negotiation
CAT-5 Twisted Pair cable
Indicator: PWR, TX (FDX, 100, Link/Act), FX (100, Link/Act)
Wavelength (nm): TX1310/RX1550nm / TX1550/RX1310nm
Transmission Method: Store and forward (Default)
Power Input: DC 5V/1A
Operating Temperature (°C):
Storage: -40 ~75 °C
Operating: -10 ~ 55 °C
Operating Humidity (Non-condensing): 5 ~ 90 %
Mount: Desk, chassis mounted
Часто покупают вместе
Угольный фильтр паросборника Electrolux ECFB03ST, черный цв., 4.7 см x 17.3 см x 17.3 см, 2 шт.
14,49 €
Обычная цена
23,00 €
