USB-разветвитель Krux KRX0102, 20 см

Active KRUX HUB equipped with a Type C connector with four USB 3.0 type A connectors. Supporting Plug & Play and Hot Swap technologies. Compatible with computers, consoles and smartphones.

Full compatibility - from laptop to smartphone

The KRUX USB Type C HUB can boast wide compatibility with various devices that require a splitter. In the case of PCs and notebooks, any device equipped with Plug & Play technology is supported. In the case of mobile phones with Android 4.4 or newer, wireless sets with receivers plugged into the connector are supported. In addition to the peripherals such as a mouse or a wireless keyboard, the hub also supports the USB OTG function - i.e. a connected USB flash drive or other type of mass memory will be visible from the phone without any problem.

The KRUX splitter increases the number of USB ports available to the user by three. It will be appreciated by people who have small notebooks or laptops equipped with a very small number of connectors, or only one type C connector. The USB HUB will allow you to connect a full set of devices necessary to perform your duties in a quick and efficient way. Choosing between connecting a mouse, keyboard or USB flash drive will be forgotten. Plug everything in and get your job done quickly and efficiently, without compromise.

Passive and active HUB

The KRUX HUB can work in two modes, depending on the user's needs:

Passive mode. Default mode - the adapter is able to transmit as much energy as the USB connector from the connected device is capable of. In passive mode, the user will only be able to use devices that consume little power (up to 500 mA), such as: Keyboard, mouse, USB flash drive.

Active mode. The mode is activated after connecting the power supply - the power supply connected to the splitter provides additional energy. Thanks to it, the HUB is able to operate devices that consume a lot of electricity (external disk drives, printers) and, if necessary, also serve as a charger for a phone or other portable device.

BC 1.2 technology supporting charging

HUB KRUX is equipped with the BC 1.2 technology which is responsible for supervising the parameters of the supplied electricity. Thanks to it, no device connected to the splitter will be damaged by overvoltage or too high voltage or current flowing from the port.

The BC 1.2 technology also ensures proper charging of devices equipped with batteries, thanks to which they will be charged quickly and at the same time safely for their batteries.

The KRUX splitter is equipped with four USB 3.0 connectors, providing transfer up to 5 Gb / s. Plug & Play technology does not require installation of additional software or drivers. Connect the HUB to the computer, wait until it is detected and connected by the system, the hardware is ready for operation.

The Hot Swap technology allows you to replace connected devices while the splitter is working, its switching off will not be needed to replace the connected peripherals.

The small size does not interfere with the connection of wide and tall devices. Due to the wide gaps between each port, most devices with a USB connector will be able to be connected side by side without any problems with space.

Support for multiple operating systems HUB KRUX supports the following operating systems:

• Microsoft Windows: XP, Vista, 7, 8, 8.1, 10, 11
• Apple Mac OS newer than 9.0
• Linux
• Android: 4.4 "KitKat" and later