Toote informatsioon
Tootekirjeldus inglise keeles:
Noise is an annoying side effect that is caused not only at the airport by aircraft taking off and in traffic by passing trucks. Especially in your own home, therefore, many people strive to provide peace, to find relaxation. Unfortunately, the PC is in many cases contrary to these efforts and annoying during operation with high noise.
The sources of noise are initially all rotating components, which mainly affects fans and hard drives. These should be decoupled and, if necessary, the speed reduced. Many housings support these measures and already offer ex works equipment.
In addition, an insulation can provide even lower external noise. With this modified version of the Kolink Punisher both approaches are connected and the housing is equipped with a pre-installed insulation.
The special feature of this compilation is that in addition to the pre-installed insulation mats, additional insulation material included. This is also tailored to fit and allows additional sealing of other housing parts. As a result, you have the choice of how much insulation you use to achieve an individual optimum of cooling and volume reduction.
When delivered, the Kolink Punisher has been fitted with insulating mats at all mandatory points to reduce the noise level of the components. These include the right side panel, the floor and the middle back. Three more mats are loosely in the housing. These are also tailored to fit and can be installed as needed. They are intended for the upper back, the front and the lid.
All additional insulation mats are labeled, which together with an enclosed installation manual ensures trouble-free installation. The manual is specially tailored to the requirements of the Kolink Punisher and explains in detail the installation, gives practical tips and explains the possibilities and insulation options.
Function: The insulating mats achieve a noise reduction via two effects. First, the soft material absorbs airborne vibrations. At the same time, the mats reduce self-propagating vibrations via the housing, above all by their own weight. Both together ensure that the outer sides of the case are hardly stimulated to vibrate. In addition, the installed fans should be throttled with the built-in control.
Note:Please note that due to the insulating mats the space inside the housing may be lower. Under certain circumstances, the laying of cables behind the mainboard tray can only be limited in comparison to the uninsulated version.
Technical details:
Noise is an annoying side effect that is caused not only at the airport by aircraft taking off and in traffic by passing trucks. Especially in your own home, therefore, many people strive to provide peace, to find relaxation. Unfortunately, the PC is in many cases contrary to these efforts and annoying during operation with high noise. The sources of noise are initially all rotating components, which mainly affects fans and hard drives. These should be decoupled and, if necessary, the speed reduced. Many housings support these measures and already offer ex works equipment.
In addition, an insulation can provide even lower external noise. With this modified version of the Kolink Punisher both approaches are connected and the housing is equipped with a pre-installed insulation.
The special feature of this compilation is that in addition to the pre-installed insulation mats, additional insulation material included. This is also tailored to fit and allows additional sealing of other housing parts. As a result, you have the choice of how much insulation you use to achieve an individual optimum of cooling and volume reduction.
When delivered, the Kolink Punisher has been fitted with insulating mats at all mandatory points to reduce the noise level of the components. These include the right side panel, the floor and the middle back. Three more mats are loosely in the housing. These are also tailored to fit and can be installed as needed. They are intended for the upper back, the front and the lid.
All additional insulation mats are labeled, which together with an enclosed installation manual ensures trouble-free installation. The manual is specially tailored to the requirements of the Kolink Punisher and explains in detail the installation, gives practical tips and explains the possibilities and insulation options.
Function: The insulating mats achieve a noise reduction via two effects. First, the soft material absorbs airborne vibrations. At the same time, the mats reduce self-propagating vibrations via the housing, above all by their own weight. Both together ensure that the outer sides of the case are hardly stimulated to vibrate. In addition, the installed fans should be throttled with the built-in control.
Note:Please note that due to the insulating mats the space inside the housing may be lower. Under certain circumstances, the laying of cables behind the mainboard tray can only be limited in comparison to the uninsulated version.
Technical details:
- Kolink Punisher Midi-Tower, white Window - insulated
- Dimensions: 263 x 539 x 400 mm (W x H x D)
- Material: steel (body), plastic (front)
- Weight: about 6 kg
- Color white
- Form factor: ATX, Micro-ATX, Mini-ITX
- Total possible fan:
2x 120 mm (front)
2x 120 mm (cover)
1x 120 mm (back) - Pre-installed:
1x 120 mm (rear, blue LED)
2x 120 mm (front, blue LED) - Radiator mountings:
1x max. 240 mm (cover)
1x 120 mm (back)
1x max. 240 mm (front) - Drive bays:
1x 5.25 inches (external)
2x 3.5 inches max. (internal)
2x 2.5 inches max. (internal) - Power supply: 1x standard ATX (optional)
- Expansion Slots: 7
- I / O-Panel:
2x USB 3.0
1x USB 2.0
1x each Audio In / Out
1x Card-Reader (TF, SD)
1x fan control (3-pin, 4 ports) - Maximum graphics card length: 390 mm
- Maximum CPU cooler height: 170 mm
- Maximum PSU length: 240 mm
- Insulation (pre-installed):
1x right side panel
1x middle back
1x floor - Insulation (included):
1x cover
1x front
1x upper back
Koos ostetud
