Toote informatsioon
Tootekirjeldus inglise keeles:
Avistron 3D Resin Standard Blend
Avistron 3D printing products are compatible with all common 3D printers and meet the highest demands, even with the smallest printing formats.
Avistron Standard is an entry-level resin and was developed to produce test prints and models without compromising on price and quality. The resin is also suitable for printing large numbers of models without mechanical properties.
Avistron 3D Resin Standard Blend
Avistron 3D printing products are compatible with all common 3D printers and meet the highest demands, even with the smallest printing formats.
Avistron Standard is an entry-level resin and was developed to produce test prints and models without compromising on price and quality. The resin is also suitable for printing large numbers of models without mechanical properties.
| Density [g / cm³] | 1.1 |
| Experimental shrinkage [%] | 5 |
| Force @ Peak [N] | 250 |
| Elong. @ Peak [%] | 2.75 |
| Young's modulus [MPa] | 688 |
| Tensile strength [N / mm] | 50 |
| Tensile stress @ break [MPa] | 18 |
| Tear strength [N / mm] | 100 |
| Shore A Hardness NA | n / A |
| Shore D Hardness 65 | 76 |
| Viscosity @ 20ºC [mPa * s] | ~ 300 |
Koos ostetud
