Toote informatsioon
Toote kirjeldus inglise keeles:
The lightweight plastic AXAGON EE25-XP WAVE box with USB 2.0 interface intended for 2.5" SATA disks.
An “unlosable” USB cable permanently connected in the box for quick direct interconnection with the laptop without the need for an additional cable.
Easy and quick change of disks in the box without the need for screwing extends the usage also by data migration, testing and other purposes.
Reading of S.M.A.R.T. information monitoring the condition of the external disk. Supports spinning down of connected disks as well as the box.
One Touch Backup feature also predetermines the external disk as an easy-to-use backup device.
Features:
Fully compatible with USB 2.0 and backward compatible with USB 1.1.
Supports transmission rates 12 / 480 Mbit/s (full / high speed).
Supports 2.5" SATA III / II / I disks of max. 9.5 mm height of all capacities.
Compliant with Serial ATA 1.0a specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s).
The total bandwidth / transmission rate of the box is determined by the USB 2.0 interface used (theor. 480 Mbit/s).
SSD/HDD boot support in external box.
HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 20 minutes.
HDD Turn Off - turns off the disk after removing the device or spinning down the PC.
Possibility to connect your device while running thanks to the Hot Plug support.
Full Plug and Play support.
One Touch Backup feature to back up your PC data at one touch of a button on the external box. After installing an app downloaded from the producht support tab, you can define any directories for backup, and then at any time just touch the button to back up your data to an external disk.
Connection via a direct USB Type A male connector on a 5 cm long flexible cable.
Practical storage of the cable inside the box while carrying it.
A 50 cm long USB 2.0 Y extension cable USB Type A female /2x USB Type A male is included.
The green LED indicates the connection to the computer's USB port (permanently lit) and the red LED indicates the data transmission (blinking).
Very quick assembly and disassembly of the housing without the need for a screwdriver. The upper face is inserted into the grooves in the lower face and secured by a lock.
The disk connects directly to the SATA connector of the motherboard, and after closing the box, it is very well fixed without the need for screwing.
Box body made of durable plastic moldings with a practical matte surface finish. It is not necessary to carry the box in a protective case.
Compact dimensions 132 x 81 x 17.5 mm.
External box weight only 67 g (without the disk).
Power supply:
Power supply via USB bus (USB bus power).
Supplying the power via USB bus from one USB port is sufficient in most cases.
If necessary, the power supply can be boosted from the second USB port thanks to the Y cable included.
Supported OSs:
MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above.
Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available.
The lightweight plastic AXAGON EE25-XP WAVE box with USB 2.0 interface intended for 2.5" SATA disks.
An “unlosable” USB cable permanently connected in the box for quick direct interconnection with the laptop without the need for an additional cable.
Easy and quick change of disks in the box without the need for screwing extends the usage also by data migration, testing and other purposes.
Reading of S.M.A.R.T. information monitoring the condition of the external disk. Supports spinning down of connected disks as well as the box.
One Touch Backup feature also predetermines the external disk as an easy-to-use backup device.
Features:
Fully compatible with USB 2.0 and backward compatible with USB 1.1.
Supports transmission rates 12 / 480 Mbit/s (full / high speed).
Supports 2.5" SATA III / II / I disks of max. 9.5 mm height of all capacities.
Compliant with Serial ATA 1.0a specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s).
The total bandwidth / transmission rate of the box is determined by the USB 2.0 interface used (theor. 480 Mbit/s).
SSD/HDD boot support in external box.
HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 20 minutes.
HDD Turn Off - turns off the disk after removing the device or spinning down the PC.
Possibility to connect your device while running thanks to the Hot Plug support.
Full Plug and Play support.
One Touch Backup feature to back up your PC data at one touch of a button on the external box. After installing an app downloaded from the producht support tab, you can define any directories for backup, and then at any time just touch the button to back up your data to an external disk.
Connection via a direct USB Type A male connector on a 5 cm long flexible cable.
Practical storage of the cable inside the box while carrying it.
A 50 cm long USB 2.0 Y extension cable USB Type A female /2x USB Type A male is included.
The green LED indicates the connection to the computer's USB port (permanently lit) and the red LED indicates the data transmission (blinking).
Very quick assembly and disassembly of the housing without the need for a screwdriver. The upper face is inserted into the grooves in the lower face and secured by a lock.
The disk connects directly to the SATA connector of the motherboard, and after closing the box, it is very well fixed without the need for screwing.
Box body made of durable plastic moldings with a practical matte surface finish. It is not necessary to carry the box in a protective case.
Compact dimensions 132 x 81 x 17.5 mm.
External box weight only 67 g (without the disk).
Power supply:
Power supply via USB bus (USB bus power).
Supplying the power via USB bus from one USB port is sufficient in most cases.
If necessary, the power supply can be boosted from the second USB port thanks to the Y cable included.
Supported OSs:
MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above.
Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available.
Koos ostetud
