Toote informatsioon
Tootekirjeldus inglise keeles:
￭ Supports 2242, 2260 or 2280 form factors of B key M.2 SATA SSD
￭ All aluminum exterior with small, pocketable design
￭ Supports TRIM to the SSD
￭ Supports USB 3.1 Gen 2 interface up to 10Gb/s super speed transfer rate
￭ Supports USB Attached SCSI Protocol (UASP) function
￭ Includes write protect function
There are three types of M.2 SSDs, please make sure you know the difference between them before pairing these with your SilverStone product.
SATA (B key) only support to install this type
Used for SATA SSDs, and interfaced through the AHCI driver and SATA 3.0 (6 Gbit/s) port exposed through the M.2 connector.
PCI Express using AHCI (M key)
Used for PCI Express SSDs and interfaced through the AHCI driver and provided PCI Express lanes, providing backward compatibility with widespread SATA support in operating systems at the cost of not delivering optimal performance by using AHCI for accessing PCI Express SSDs.
PCI Express using NVMe (M key)
Used for PCI Express SSDs and interfaced through the NVMe driver and provided PCI Express lanes, as a high-performance and scalable host controller interface designed and optimized especially for interfacing with PCI Express SSDs. NVMe has been designed from the ground up, capitalizing on the low latency and parallelism of PCI Express SSDs, and complementing the parallelism of contemporary CPUs, platforms and applications.
Please note: The MS10 is only designed for M.2 SATA SSD, it is not compatible with NVMe SSD.
￭ Supports 2242, 2260 or 2280 form factors of B key M.2 SATA SSD
￭ All aluminum exterior with small, pocketable design
￭ Supports TRIM to the SSD
￭ Supports USB 3.1 Gen 2 interface up to 10Gb/s super speed transfer rate
￭ Supports USB Attached SCSI Protocol (UASP) function
￭ Includes write protect function
SATA (B key) only support to install this type
Used for SATA SSDs, and interfaced through the AHCI driver and SATA 3.0 (6 Gbit/s) port exposed through the M.2 connector.
PCI Express using AHCI (M key)
Used for PCI Express SSDs and interfaced through the AHCI driver and provided PCI Express lanes, providing backward compatibility with widespread SATA support in operating systems at the cost of not delivering optimal performance by using AHCI for accessing PCI Express SSDs.
PCI Express using NVMe (M key)
Used for PCI Express SSDs and interfaced through the NVMe driver and provided PCI Express lanes, as a high-performance and scalable host controller interface designed and optimized especially for interfacing with PCI Express SSDs. NVMe has been designed from the ground up, capitalizing on the low latency and parallelism of PCI Express SSDs, and complementing the parallelism of contemporary CPUs, platforms and applications.
Please note: The MS10 is only designed for M.2 SATA SSD, it is not compatible with NVMe SSD.
Koos ostetud
