Toote informatsioon
Tootekirjeldus inglise keeles:
When water enters where it is not supposed to, you need to react quickly to prevent greater damage e.g. in the home. The GARDENA Premium Submersible Pump 21000 inox is just the right pump if you need to quickly and powerfully drain lots of water at once. Up to 21,000 litres per hour can be pumped with clear and lightly dirtied water with up to 5 mm particle diameter. Equipped with an adjustable switching base, flat suctioning up to 3 mm is possible. Nearly the entire water is drained and a wipe-dry floor is the result. A Float Switch ensures automatic cut-in and cut-out. Through a cable holder for the Float Switch, the cut-in and cut-out levels are variable and can be precisely adjusted. If required, you can also switch to permanent manual pump operation via a plug-in device. Thanks to the 10-metre-long connection cable the practical and robust pump can be universally used - also in great depths.
The use of high-quality materials fulfils highest demands on the premium model. The pump has a housing made of stainless steel that renders it highly robust and longlife. A low-wear pump impeller and a low-noise, maintenance-free capacitor motor with thermal protection switch allow reliable pump operation.
Thanks to the universal connection,13 mm (1/2")-, 16 mm (5/8")-, 19 mm (3/4")-, 25 mm (1")-, 38 mm (1 ½")- and 50 mm (2") hoses can be connected to the pump.
When water enters where it is not supposed to, you need to react quickly to prevent greater damage e.g. in the home. The GARDENA Premium Submersible Pump 21000 inox is just the right pump if you need to quickly and powerfully drain lots of water at once. Up to 21,000 litres per hour can be pumped with clear and lightly dirtied water with up to 5 mm particle diameter. Equipped with an adjustable switching base, flat suctioning up to 3 mm is possible. Nearly the entire water is drained and a wipe-dry floor is the result. A Float Switch ensures automatic cut-in and cut-out. Through a cable holder for the Float Switch, the cut-in and cut-out levels are variable and can be precisely adjusted. If required, you can also switch to permanent manual pump operation via a plug-in device. Thanks to the 10-metre-long connection cable the practical and robust pump can be universally used - also in great depths.
The use of high-quality materials fulfils highest demands on the premium model. The pump has a housing made of stainless steel that renders it highly robust and longlife. A low-wear pump impeller and a low-noise, maintenance-free capacitor motor with thermal protection switch allow reliable pump operation.
Thanks to the universal connection,13 mm (1/2")-, 16 mm (5/8")-, 19 mm (3/4")-, 25 mm (1")-, 38 mm (1 ½")- and 50 mm (2") hoses can be connected to the pump.
Wipe-dry draining up to 3mm
The adjustable switching base of the pump allows a flat suction up to a minimum residual water level of 3 mm. Nearly all water is suctioned from the ground for a wipe-dry result.
Permanent manual operation
Simply plug the float switch into the device on the pump for manual operation
Problem-free use
A robust housing made of fibre-glass reinforced plastic, a low-wear pump impeller and a low-noise, maintenance-free capacitor motor with thermal overload protection guarantee a long life.
Individual connection
Through the universal connection, hoses with 13mm (1/2") to 50 mm (2") can be used.
High-performance
Up to 21,000 litres per hour can be pumped with the Premium Submersible Pump, to effectively drain or transfer water.
Koos ostetud
