Toote informatsioon
Tootekirjeldus inglise keeles:
The Glacier G2080 Ti Founders Edition from PHANTEKS is a high-quality and powerful heat sink for custom water cooling that fits on the reference PCB of the NVIDIA GeForce RTX 2080 Ti graphics card . Thanks to the optimized channel structure and nickel-plated copper block, efficient cooling of the GPU, memory and voltage converter is guaranteed. With its lid made of transparent acrylic glass and chrome-plated aluminum, the heat sink ensures an absolutely unique and elegant look.
The PHANTEKS Glacier G2080 Ti Founders Edition water cooler at a glance:
The lid is made of transparent acrylic glass in the middle and chrome-plated aluminum on the outside . The connection terminal has four holes (G1 / 4-inch thread). Due to the flat design of the cooler, the connection of several graphics cards in a SLI network is also possible without any problems.
The digital RGB LED lightingis equipped with the same RGB connections that are used for other PHANTEKS products and can be controlled via the RGB LED control (if available) of a PHANTEKS housing. Connection to the corresponding mainboards is possible via a connector. Compatibility with the ASUS ROG Aura and MSI Mystic Light RGB LED headers is also available.
The sealing ring of the PHANTEKS Glacier G2080 Ti Founders Edition is made of high quality Viton. The material is also used in the aerospace industry. It has an extremely long shelf life and is highly resistant to high temperatures and reactive liquids. Why should I cool my graphics card with water? Top performance is still bought in the graphics card segment with an equally top heat development. Because the decisive advantage over the competing products can only be achieved if the clock screw is turned as far as it will go and the calculation units are used right down to the last segment. Smaller structure widths and more efficient layouts can limit this problem, but they cannot be completely eliminated. Because, as expected, the next generation will be challenged to the maximum.
The problem is exacerbated by overclocking because the temperatures can reach critical values. In short: If you want a low volume even while gaming or even benching and possibly want to turn the clock screw at the same time, you can hardly avoid water cooling. In addition to the usual components (radiator, pump, expansion tank), a suitable cooler for the NVIDIA GeForce RTX 2080 Ti graphics cards is of course necessary - like this model from the Wakü specialist PHANTEKS.
Note 1: Connections that are not included in the scope of delivery are required for integration into the cooling circuit. The original cooler must be removed before assembly, which invalidates the manufacturer's guarantee!
Note 2:Since compatibility can be expanded with new graphics cards and the scope of delivery can change in rare cases, please check on the manufacturer's website whether you can use the PHANTEKS Glacier G2080 Ti Founders Edition water cooler and which accessories are included with the water cooling block.
Note 3: No additional backplate is required for this Glacier GPU water cooler , since the existing backplate of compatible graphics cards can be used!
Technical details:
Attention: Please note that some coolers are delivered with a protective film on the bottom. This must always be removed before assembly and commissioning. We accept no liability for damage caused by incorrect or incorrect assembly and improper use!
The Glacier G2080 Ti Founders Edition from PHANTEKS is a high-quality and powerful heat sink for custom water cooling that fits on the reference PCB of the NVIDIA GeForce RTX 2080 Ti graphics card . Thanks to the optimized channel structure and nickel-plated copper block, efficient cooling of the GPU, memory and voltage converter is guaranteed. With its lid made of transparent acrylic glass and chrome-plated aluminum, the heat sink ensures an absolutely unique and elegant look.
The PHANTEKS Glacier G2080 Ti Founders Edition water cooler at a glance:
- A perfect fit for the NVIDIA GeForce RTX 2080 Ti graphics cards
- Effective cooling performance thanks to nickel-plated copper floor
- Impressive look thanks to the lid made of aluminum and acrylic glass
- Four G1 / 4-inch connections for integration into the circuit
- Pre-assembled digitally addressable RGB LED lighting
The lid is made of transparent acrylic glass in the middle and chrome-plated aluminum on the outside . The connection terminal has four holes (G1 / 4-inch thread). Due to the flat design of the cooler, the connection of several graphics cards in a SLI network is also possible without any problems.
The digital RGB LED lightingis equipped with the same RGB connections that are used for other PHANTEKS products and can be controlled via the RGB LED control (if available) of a PHANTEKS housing. Connection to the corresponding mainboards is possible via a connector. Compatibility with the ASUS ROG Aura and MSI Mystic Light RGB LED headers is also available.
The sealing ring of the PHANTEKS Glacier G2080 Ti Founders Edition is made of high quality Viton. The material is also used in the aerospace industry. It has an extremely long shelf life and is highly resistant to high temperatures and reactive liquids. Why should I cool my graphics card with water? Top performance is still bought in the graphics card segment with an equally top heat development. Because the decisive advantage over the competing products can only be achieved if the clock screw is turned as far as it will go and the calculation units are used right down to the last segment. Smaller structure widths and more efficient layouts can limit this problem, but they cannot be completely eliminated. Because, as expected, the next generation will be challenged to the maximum.
The problem is exacerbated by overclocking because the temperatures can reach critical values. In short: If you want a low volume even while gaming or even benching and possibly want to turn the clock screw at the same time, you can hardly avoid water cooling. In addition to the usual components (radiator, pump, expansion tank), a suitable cooler for the NVIDIA GeForce RTX 2080 Ti graphics cards is of course necessary - like this model from the Wakü specialist PHANTEKS.
Note 1: Connections that are not included in the scope of delivery are required for integration into the cooling circuit. The original cooler must be removed before assembly, which invalidates the manufacturer's guarantee!
Note 2:Since compatibility can be expanded with new graphics cards and the scope of delivery can change in rare cases, please check on the manufacturer's website whether you can use the PHANTEKS Glacier G2080 Ti Founders Edition water cooler and which accessories are included with the water cooling block.
Note 3: No additional backplate is required for this Glacier GPU water cooler , since the existing backplate of compatible graphics cards can be used!
Technical details:
- Material: nickel-plated copper (bottom), acrylic (lid), chrome-plated aluminum (lid)
- Thread: 4x G1 / 4 inches
- Dimensions: 124 x 260 x 16.5 mm (W x H x D)
- Weight: 800 g (without liquid)
- Compatibility:
NVIDIA GeForce RTX 2080 Ti Founders Edition (reference PCB)
NVIDIA GeForce RTX 2080 Founders Edition (reference PCB)
Attention: Please note that some coolers are delivered with a protective film on the bottom. This must always be removed before assembly and commissioning. We accept no liability for damage caused by incorrect or incorrect assembly and improper use!
Koos ostetud
Juhtmevaba klaviatuuri ja hiire komplekt Logitech MX Keys S Combo 920-011614, EN, grafiit v.
154,99 €
Tavahind
176,90 €
