Name: Vesijahutus protsessorile Arctic II 420, 458 mm x 38 mm
Brand: Arctic
Price: 165.9 EUR
Availability: OutOfStock

Toote informatsioon

Üldnäitajad

Toote tüüp

Veejahutid

Kaubamärk

Arctic

Mudel

II 420

Ettenähtud

Protsessorile

Värv

Must v.

Tehnilised parameetrid

Pistikute tugi

AM4, LGA 1150, LGA 1151, LGA 1155, LGA 1156, LGA 1200, LGA 2011-v3, LGA 2066

Maksimaalne pöörete kiirus minutis

1900 rpm

Taustvalgus

Jah

Mõõtmed ja kaal

Laius

458 mm

Sügavus

138 mm

Kõrgus

38 mm

Kaal

1977 g

Lisaks

Kuulub komplekti

1 x Arctic Liquid Freezer II 420 RGB vedel protsessori jahuti

Pretensiooni esitamise õigus eraklientidele

24 kuud

Täiendav info

Võrguühendus: 4-kontaktiline RGB pistik, ventilaatori ühendus, 4 kontaktiga funktsioonid, PWM (impulsi laiuse modulatsiooni) tugi, RGB LED-id x12

Märkasid viga toote kirjelduses, spetsifikatsiooni tabelis või fotogaleriis? Teavita meid

Toote värv võib erineda fotol näidatust.

ARCTIC Liquid Freezer II 420 RGB - processor liquid cooling system

Product features
Compatibility with LGA1700
Thanks to the LGA1700 mounting kit, the entire Liquid Freezer II series is compatible with Intel's Alder Lake processors. Even if the base and heat spreader have increased compared to the predecessor, the CPU die surface has been reduced and remains centered. The Coldplate of the Liquid Freezer II completely covers this area.
Make your system glow.
The Liquid Freezer II RGB combines the efficient PWM pump of the Liquid Freezer II, which has been acclaimed by reviewers, with the RGB fans optimized for static pressure. In this way you achieve a completely new aesthetic with extremely low volume and just as low temperatures.
Efficient, self-developed pump
When developing the water pump, ARCTIC, unlike many of its competitors, went to great lengths. The result is greatly reduced hum and higher efficiency. Like the other components, it is also PWM controlled. This leads to a significantly lower noise level at low and typical load, but also to a much lower power consumption of 0.9 W in idle, 2.5 W under normal load and a maximum of 5.3 W under full load for the entire AiO.
Premium class radiator
Unlike most other all-in-one liquid cooling manufacturers, 38 mm thick radiators with a high lamellar density are used. In this way, a larger amount of water can be used in the circuit and the cooling surface can be increased significantly. Water has a much higher heat capacity than aluminum or copper. This leads to a slower and up to 5 ° C lower temperature rise in the temporary turbo mode of modern CPUs.
Smooth-running VRM fan
Small fans have a reputation for being particularly loud and not very durable. A quiet and durable diagonal fan has been specially developed for the Liquid Freezer II. The fan is PWM-controlled and can cool your voltage converters and the base area almost inaudibly by up to 15 ° C, especially in overclocking scenarios, with insufficient VRM cooling or in cases with poor airflow, thus allowing continuously high loads. If there is sufficient VRM cooling, it can be switched off at will.
High-quality hoses with integrated cable management
The fiber-reinforced, long EPDM tubing of the Liquid Freezer II enables installation even in large housings and effectively prevents the cooling liquid from evaporating, so that you don't have to worry about refilling the compact water cooling system. In addition, it hides the cables of your radiator fans through a well thought-out cable management. You only have to connect two plugs to the mainboard and save valuable time during installation. In the end, you don't need to hide any more cables and your view is reduced to the essentials.
The right configuration for everyone
With its long hoses, availability in 5 sizes and various lighting options , the Liquid Freezer II series is extremely versatile. It is highly compatible and can be used profitably from small form factor PCs to big towers.